Channels set-up, Initial set-up – Technicolor - Thomson 30L03B User Manual

Page 11

4. CHANNELS SET-UP

Note :If you use the device as LCD Monitor function not a TV, you may skip the chapter.

Initial set-up

AUTOMATIC INSTALLATION

Return

Standard

EURO…

Start

Running…

Frequency

150.75MHz

Programmes found

Initial set-up involves selecting all the settings required
to be able to search for and store all the channels you
can receive.

Make sure that the television is switched on and follow
all the steps in turn specified on this page.

When you first switch the TV set on, the language selection menu appears.

Choose which language you want the menus to appear by using the

/ À buttons.

When you select a language, it is applied to the menus immediately.

2

Confirm with OK. Countries menu will come out and a list of countries will appear.

Select the relevant country by using the ¿ / À buttons.

This is the country you are in, or the country whose channels you want to receive if living near its borders

Confirm with OK. The AUTOMATIC INSTALLATION menu will display.

The Standard option is selected.

Select a suitable standard using the

/ ¾

buttons.

Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg,
DK for Eastern Europe, the Middle East and Asia, EURO for Western Europe, Australia and New Zealand.

Then select the Start

option by using the À button and press OK

to start the search.

During this time the message “Running” appears next to the Start

option and the Frequency

and

Programmes found

options appear, informing you of the process of installation procedure.

If you press the EXIT

button before the end of channel searching, the channels already found are stored.

Once the search has ended the ORGANISER

menu appears (see following page).

Note : You may subsequently return to AUTOMATIC INSTALLATION menu by selecting the Automatic
installation line in the INSTALLATION menu.