TMC EV4500 - Manual (Page 90)

76
Reviewing, Erasing or Changing an Auto Attendant OGM
To review an Auto Attendant
OGM:
1 Press P.
- The display will read
“
Program...”
2 Press the soft key under ANSW.
3 Press the soft key under NEXT.
- The display will read “ OGM Setup.”
4 Press the soft key under ENTER.
- The display will read “ Ans OGM.”
5 Press the soft key under NEXT
repeatedly, until the OGM you wish
to review is shown in the display.
The choices are:
AA Day OGM
AA Night OGM
AA Zero-Out OGM
6 Press the soft key under PLAY to
review the OGM.
Reviewing an Auto Attendant OGM
You may review an Auto Attendant OGM at any
time. To do this, follow the instructions at left.
Erasing an Auto Attendant OGM
To Erase an Auto Attendant OGM, follow the
instructions on the previous page for recording
an Auto Attendant OGM. After pressing the soft
key under
REC, immediately press the soft key
under STOP. This will return the OGM to the fac-
tory pre-recorded OGM.
Changing an Auto Attendant OGM
To change an Auto Attendant OGM, simply follow
the instructions on the previous page for record-
ing an Auto Attendant OGM. The newly recorded
OGM will automatically replace the old one.
You can easily review your auto
attendant OGMs at any time
Answering System
Setting Up and Operating a Telephone as an Auto Attendant
AA Day OGM
PLAY REC NEXT
EV4500 UG combined v52 in PDF order 101005.qxd 10/10/2005 4:53 PM Page 90