Tangent CDP-50 - Manual (Page 17)

16
OPERATION AND FUNCTIONS
Program
Repeat
- 8
8
15
-58:34
The CDP-50 can be programmed to play the
tracks of a CD in a certain order.
Press the PROGRAM button when playback
has been stopped. The MEMORY symbol
and "Pr p:01" will be displayed.
Use << and >> to select the track that you
wish to include in the programming and
confirm your choice by pressing the
PROGRAM button again. This procedure
must be repeated until you have selected all
the tracks that you wish to hear.
The tracks that have been selected are
shown on the display by means of the music
calendar. It will also be possible to view the
total number of tracks programmed by
means of the text "p:09". (P:09 if you have
programmed a total of 9 tracks.)
Press the PLAY button to start playback.
Press the STOP button twice to deactivate
the programming function. Then the normal
display will return.
Note:
When you press << or >>, you will select the
next track in the programmed order.
- 8
8
- 8
8
5
- 3:14
- 8
8
5
- 3:14
The CDP-50 can be set to repeat one or all
tracks of a CD.
This is done by means of the REPEAT
button on the remote control. (Note that this
function can only be activated by means of
the remote control).
If you press the button once, one track will
be repeated and the message "REPEAT
ONE" will be displayed.
If you press the button twice, all tracks will
be repeated and the message "REPEAT
ALL" will be displayed.
If you wish to deactivate the repeat function,
press the REPEAT button for a third time.
Note:
This function can also be used when
"Program" has been activated.