TP-Link TD-W8900G - Manual (Page 12)

TD-W8900G 54M Wireless ADSL2+ Router User Guide
Figure 2-2
¾ Antenna: Used for wireless operation and data transmit.
¾ Power: The Power plug is where you will connect the power adapter.
¾ LAN 1,2,3,4: Four 10/100Mbps RJ45 LAN ports for connecting the router to the local
PC(s)
¾ Reset Button:
There are two ways to reset the Router's factory defaults:
1) Press the reset button of the Router, and then power on the Router, hold reset button
pressed down for about five seconds,
2) Restore the default setting from “Management - Settings - Restore Default “of the
Router's Web-based Utility.
¾ Line: Connect to the Modem Port of Splitter or to the telephone line.
¾ Wireless antenna
2.3
2.4
System Requirements
¾ Make sure your computer has a Networking Interface Card (either wired or wireless is ok)
before connecting the Router to your computer.
¾ An operating system supporting the TCP/IP protocol.
¾ Broadband Internet Access (ADSL).
¾ Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.
Installation Environment Requirements
¾ The Router should not be located where it will be exposed to moisture or excessive heat.
¾ Place the Router in a location where it can be connected to the various devices as well as to a
power source.
¾ Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
5