Tricity Bendix UF406W - Manual (Page 16)

Electrical Connections
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity
supply voltage is the same as that indicated on
the appliance rating plate.
The appliance is supplied with a 13 amp plug
fitted. In the event of having to change the fuse in
the plug supplied, a 13 amp ASTA approved
(BS1362) fuse must be used.
Should the plug need to be replaced for any
reason. The wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow : Earth
Blue : Neutral
Brown : Live
The wire coloured green and yellow must be
connected to the terminal marked with the letter
"E" or by the earth symbol or coloured green
and yellow.
The wire coloured blue must be connected to the
terminal marked "N" or coloured black.
The wire coloured brown must be connected to
the terminal marked "L" or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must
be secure over the outer sheath.
16