Sony SLV-SE210G - Manual (Page 10)

10 Setting up the remote commander
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the batteries to
the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive (+)
end clicks into position.
Using the remote commander
You can use this remote commander to
operate this VCR and a Sony TV.
Buttons on the remote commander
marked with a dot (
• ) can be used to
operate your Sony TV. If the TV does
not have the
symbol near the remote
sensor, this remote commander will not
operate the TV.
To operate Set [TV] / [VIDEO] to
the VCR [VIDEO] and point at the remote sensor at the VCR
a Sony TV [TV] and point at the remote sensor at the TV
1 2 3
4 5 6
7 8 9
0
Remote sensor
[TV] /
[VIDEO]