Specifications – Perreaux PMF1100 User Manual
Page 2
www.perreaux.com
Specifications:
Power Output
100W
rms
per channel both channels driven into 8Ω from 20Hz to 20kHz at no more than 0.015%
Total Harmonic Distortion.
Dynamic Headroom ...................................................................................................................1.5dB
Frequency Response ........................................................................................10Hz-100kHz ±0.1dB
Intermodulation Distortion (S.M.P.T.E. method 60 Hz and 7 kHz mixed 4:1)
10W to rated output into 8Ω ................................................................................................< 0.008%
1W to 10W into 8Ω..............................................................................................................< 0.005%
Rated output ............................................................................................................ Typically 0.004%
Slewing Rate .............................................................................................................................70V/μs
Transient Response.....................................................................................................................0.8μs
Hum and Noise ...........................................100dB Lin below rated output 20Hz-20kHz (110dB "A)
Damping Factor................................................................................................................ > 200 at 8Ω
Input Impedance ........................................................................................................................ 10kΩ
Input Sensitivity .............................................................................................1.5V
rms
for rated output
Phase Response...........................................................................................+1° at 20Hz -1° at 20kHz
Load Impedance
Rated for 8Ω usage but will safely drive any load from 4Ω up, including reactive loads such as full
range electrostatic loudspeakers.
Dimensions
Width...........................................................................................................................370mm (14.5”)
Height............................................................................................................................133mm (5.3”)
Depth...........................................................................................................................295mm (11.0”)
:
Schematic diagram
:
Product manual