Toshiba ST-7000-C Series - Manual (Page 15)

8. SPECIFICATIONS EO1-12030
8.1 Basic Specifications
8- 1
8. SPECIFICATIONS
8.1 Basic Specifications
Item Description
Input voltage AC 100V-240V +10%, -10% 50/60Hz 4.8A-2.3A
DC output voltage DC24V +5%, -5%
AC output voltage AC 100V-240V +10%, -10% 50/60Hz 2.0A-1.0A
Operating temperature 5
°
C to 35
°
C
Relative humidity 10% to 80%RH (no condensation)
Dimensions 315 mm (W) x 466 mm (D) x 112.5 mm (including the rubber feed and
cable cover)
Weight 9.5 Kg (without 2 HDDs, CD, UPS battery, PCI, and packing materials)
Power cord A power cord is not included in this product. Please use one complied
with each country’s safety standard. For details, please contact the
nearest TOSHIBA TEC service representative.
CPU Intel Celeron

1.2 GHz with 256 KB secondary cache
BIOS ROM 1MB Flash ROM
Capacity Standard 128MB (Max. 2GB)
Max. 1GB/slot can be equipped. RAM
Type DDR SDRAM PC2100, 2.5V unbuffered type, non ECC 184-pin DDR
SDRAM DIMM connector, 2 slots installed
Interface RS-232C x 4, Parallel x 1, USB x 1, Drawer x 2 (24V type), PS/2 x 1,
PCI (Half size slot) x 2, +24V OUT (DIN 3-pin) x 1
Display interface RGB x 1 channel (on-board, standard)
Hard Disk Drive (HDD) Max. 2 units of 3.5-inch HDD (option) can be connected.
CD-RW drive 1 drive (local purchase is required),
CD connection kit required (option)
LAN interface 10 BASE-T, 100 BASE-TX (Wake on LAN support)
Floppy Disk Drive (FDD) USB interface type (local purchase is required.)
Support OS Windows 2000, Windows XP, DOS