Transition Networks J/E-CX-TBT-01 - Manual

The Transition Networks J/E-CX-TBT-01
Ethernet media converter connects
10Base-T shielded or unshielded
twisted-pair copper cable to 10Base-2
coaxial copper cable.
The J/E-CX-TBT-01 supports up to 24
devices daisy-chained on one coax
segment per twisted-pair segment.
User’s Guide
J/E-CX-TBT-01
Stand-Alone Media Converter
• Coax to Twisted-Pair
• 10Base-2 to 10Base-T
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .3
Cable Specifications . . . . . . . . . . .4
Troubleshooting . . . . . . . . . . . . . .5
Technical Specifications . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . .7
Part Number Port One - Twisted-Pair Port Two - Coax
* Typical maximum cable distance. The actual maximum cable distances are
dependent upon the physical characteristics of the network installation.
J/E-CX-TBT-01 RJ-45, 10Base-T
100 m (328 ft)* BNC, 10Base-2
185 m (610 ft)*