Thiel Audio Products CS3.7 - Manual (Page 9)

7
GRILLE
The CS3.7 grille is attached magnetically to the front of the speaker. The grille is designed to not produce
diffraction so there is no sonic reason to remove it. If you do need to remove the grille, carefully pull the grille
frame away from the front of the speaker. When replacing the grille, line up the grille with the baffle’s inlay edges.
OPTIONAL OUTRIGGER BASE
The CS3.7s can be used with an optional Outrigger base (shown right). The
Outriggers attache to the bottom of the speaker cabinet with four mounting
bolts (provided with the Outrigger) screwed into the four threaded openings
normally used for the speaker’s stabilizer feet. Complete installation
instructions are included with the Outriggers.
CARE
The cabinets possess a high quality lacquer finish that is both beautiful and
durable. However, any wood finish can be damaged by excessive moisture,
dryness, or direct sunlight.
When cleaning your speakers, avoid using oils, waxes, or polishes that
contain silicone. We recommend Endust. Dusty grilles can be cleaned by
using the upholstery attachment of a vacuum cleaner.
SERVICE
If your speaker system requires service, contact your authorized THIEL
dealer. If you need to contact THIEL directly, service information and
technical support is available at (859) 254-9427, Monday-Friday, 8:30 a.m. -
5:00 p.m. Eastern Time, or via e-mail at [email protected]. THIEL
dealer information and a “Frequently Asked Questions” section can be found
at our web site, www.thielaudio.com.
CS3.7 with optional
Outrigger Base