Before using the dvd player, Connecting the optical equipment, Tv broadcast system – Toshiba SD-43HK User Manual
Page 8: About the symbol display
CONNECTIONS
•
When the power is not turned on, press down the STOP ( ) button on the main unit
for over 5 seconds.
The product will be initialized to its optimum state.
•
Some operational features such as the Speaker mode, Test tone, Volume, etc. will not
be displayed on the TV screen.
Before Using the DVD Player
14
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
TV Broadcast System
• This device is designed to work with the PAL video format.
• To change the TV broadcast system to be output, press the ZOOM button while
the power is turned off. The selection will switch between NTSC and PAL each
time you press the button.
• For normal playback, the video format a DVD disc is recorded in must coincide
with your TV's video format.
13
About the symbol display
• “ ” may appear on the TV screen during operation.
This icon means the function explained in this owner’s manual is not available on
that specific DVD video disc.
Note
Connecting the Optical Equipment
Y
L
R
DIGITAL OUT
VIDEO IN
External Digital
Components
External Analog
Components
Audio Cable (Red/White)
If the external analog
component has only one
output jack, you may connect
either L or R.
For connection to external
equipment with digital output.
Example: CD recorders, MD (Mini Disc) D/A
converters or other components equipped
with digital output jacks
Connect to external equipment with
analog output.
Example: VCR, TV, etc.
•
Always connect the video
and audio connection
cables to the equivalent
colored jack.
Press AUX on the remote control to select DIGITAL IN, AUX1, or AUX2.
Press Function on the main unit to select DIGITAL IN, AUX1, or AUX2.
•
Each time the button is pressed the mode switches as follows: FM
➞
AM(MW)
➞
DVD/CD
➞
DIGITAL IN
➞
AUX 1
➞
AUX 2.
To Play External Digital/Analog Equipment
Optical Cable
(not supplied)
To view pictures from
external input , first con-
nect the VIDEO IN jack
and then connect the
VIDEO OUT jack.
TV
Warning