User maintenance instructions, Insufficient liquid, Care and cleaning – Toastmaster TMHP4 User Manual
Page 8
Insufficient Liquid
WARNING: Do not plug in the Hot Pot unless it is filled at least to the
MIN mark. Misuse of this kind will shorten the life of the element, it
may bake food on to the surfaces of the Hot Pot, and/or splatter the
contents of the Hot Pot over the surface of the table or counter.
CAUTION: If the Hot Pot does not contain sufficient liquid, the
thermostat will cycle ON and OFF to regulate the temperature, but
eventually the food will bake on to the surfaces of the Hot Pot, and
may be impossible to remove completely.
1. Unplug, then wait until the Hot Pot has cooled down fully before
attempting to remove the contents.
2. The Hot Pot is equipped with a self-resetting thermostat.
3. If the Hot Pot is left without liquid, and left ON for a long time,
the thermostat will cycle ON and OFF to regulate the
temperature, but the unit will not turn itself OFF. Unplug and let
the unit cool completely to allow the thermostat to reset. The Hot
Pot will then be ready for reuse.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing
requiring disassembly must be performed by a qualified appliance
repair technician.
Care and Cleaning
1. Unplug from the electrical outlet and let the Hot Pot cool down
completely before cleaning.
2. DO NOT IMMERSE THE HOT POT IN WATER OR ANY
OTHER LIQUID.
3. Wash the inside of the Hot Pot with warm soapy water. Rinse
thoroughly to remove all traces of the soap.
4. Clean the outside of the Hot Pot with a damp cloth.
5. Do not allow water to get inside the base of the Hot Pot.
6. Do not use harsh or abrasive cleaners or solvents.
7. The plastic may discolor with use. This will not affect the
performance of the Hot Pot. To clean some of the food residue
out of the pot, fill the Hot Pot with 2 cups of cold water, dissolve
one tablespoon of cream of tartar into the water, then boil for
6 to 9 minutes. Unplug from the electrical outlet, allow to cool,
then empty.
7
TMR_TMHP4_IB_9-2-07 2/9/07 4:39 PM Page 8