Toastmaster A710SA EN - Manual

Foodservice Equipment
Job Item#
Toastmaster ® 10 Sunnen Dr. St. Louis, MO 63143• www.toastmastercorp.com
Toll Free: 1-800-264-7827 • Telephone: 1-314-781-2777 • Toll Free Fax: 1-800-264-6666 • Fax: 314-781-3636
Sandwich and Panini Grills
Non-Stick Coated Surface: A710SA, A710PA
Application:
Toastmaster A710 Series Sandwich
and Panini grills are designed to
uniformly grill both sides of a
sandwich at the same time. To add to
the grills’ versatility, the bottom grill
can be heated alone.
General Information:
Light-duty elecric grill with
simultaneous top and bottom grilling
eliminates flipping sandwiches.
Overall dimensions are:
17” W x 18-1/2”D x 11 3/4” H
Neoprene feet are provided.
• Models A710 and A710S feature
smooth upper and lower grill plates.
• Model A710P features grooved
upper and lower plates.
Construction:
Construction is of formed and welded
sheet steel. Grill plates are of cast
aluminum. An 8 oz. capacity grease
receptacle at the rear is easily
removable for emptying and cleaning.
Model A710 features grill plates with a
natural aluminum finish. Models
A710S and A710P feature grill plates
with a DuPont SilverStone Supra
®
nonstick flouropolymer coating.
Capacity:
Grills up to 4 sandwiches at one time.
Heating:
A preformed tubular heating element
is clamped beneath the grill on each
of the top and bottom grill plates.
Controls:
Controlled by an adjustable
thermostat with a range of 150
o F to
450 o F with an “OFF” position. A three
position switch is provided to turn the
unit off, operate the bottom grill only,
or operate both top and bottom grills.
The top grill can be adjusted from
paper-thin to thick sandwich heights
and locked into place to provide
consistent result.
Electrical:
Total rated input is 1.65 KW (0.65 KW
top element, 1.0 KW bottom
element). Available in 120V, 208V or
240V. All units are single-phase and
are equipped with a 3 foot (914mm)
cord and NEMA plug. Refer to the
electrical specifications table on the
reverse side of this sheet.
Coating:
Model A710 features grill plates
with a natural aluminum finish.
Models A710S and A710P feature
grill plates with a DuPont
SilverStone Supra
® nonstick
fluoropolymer coating.
SilverStone Supra
® is the most
durable nonstick system of the
DuPont SilverStone
® family of
nonstick coatings. The coating was
designed for small electric
appliances and top-of-range
cookware, and works well for a
variety of commercial food
processing applications where
resistance to heat and abrasion
are important. It three-coat
application system complies with
FDA regulations governing direct
food contact.
SilverStone Supra ® is a
registered trademark of DuPont.
All rights are reserved.
Warranty:
Warranted for one year covering
parts and labor. Call factory for
warranty authorization.
Model Shown: May ship UPS
Standard Features:
• Adjustable from paper
thin to 2” thickness
• Top locks at desired
thickness
• Use top & bottom or
bottom heat only
• Grease receptacle
• Handles for portability
• Bottom cook surface
12-7/8” D x 14-1/16” W
• Top cook surface
12” D x 13-1/16” W
A710SA
A710PA