Tissot G15 - Manual (Page 3)

Quartz Chronographs G10/G15
*
www.tissot.ch 134_EN / 05.07 3/5
Simple timing
The simple « chronograph function » enables you to measure isolated events.
1 START
2 STOP
Readout of time (see example)
- 5 minutes,
- 57 seconds,
- 7/10ths of a second
3 Reset to zero
NB: Before each timing operation, the chronograph hands must be at their start points. If necessary, refer to
the paragraph entitled SETTING THE COUNTERS TO ZERO.
Comment: All the timing functions are available while the crown is pressed into position I.
ADD function
The ADD function enables you to measure consecutive events without having to reset to zero in between. Each
time is added to the previous total.
1 START
2 STOP Readout
3 RESTART
4 STOP Readout
5 RESTART
6 STOP Readout
X Reset counters to zero
SPLIT-TIME function
The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting the
timing operation. When you restart, the hands « catch up » to the ongoing elapsed time.
1 START
2 SPLIT 1
Readout of time 1 (see fig. 2)
- 5 minutes,
- 4 seconds,
- 6/10ths of a second
3 RESTART (catchup)
4 SPLIT 2
Readout of time 2
- 15 minutes,
- 36 seconds,
- 8/10ths of a second
5 RESTART (catchup)
6 STOP
Readout of the last time (cumulative time)
- 25 minutes,
- 18 seconds,
- 4/10ths of a second
7 Reset counters to zero