Tanaka ECV-4501 - Manual (Page 2)

www.tanakapowerequipment.com 1 [email protected]
Owner’s Manual ECV-4501
Before using this unit:
• Read the operator’s manual carefully.
• Check that the cutting equipment is correctly assembled
and adjusted.
• Start the unit and check the carburetor adjustment.
See “Maintenance”.
One-handed usage not permitted.
While cutting, hold saw firmly with
both hands with thumb firmly locked
around front handle.
Warning, kickback danger. Be careful
sudden and accidental upward and/or
backward motion of the guide bar.
WARNING
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Always wear eye, head and ear
protectors when using this unit.
It is important that you read, fully understand and
observe the following safety precautions and
warnings. Careless or improper use of the unit
may cause serious or fatal injury.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.