Transmission capability, Multiple service capability, Signalling capability (option) – Technicolor - Thomson BP 8244 User Manual
Page 8: Atm adaptation layer, Management
SNA 4600
Standalone ARM Network Adaptor
Configuration
guide
Issued by Network Products Marketing Department
GSNA4600 - 09/1999
THOMSON broadcast systems - All rights reserved
p. 8 of 11
Transmission Capability
Tributaries effective bit rate versus the network bit rate:
Network bit rate (Kbps)
Tributaries effective bit rate (Kbps)
34,368 (E3)
29,131
44,736 (DS3)
37,967
139,264 (E4)
118,727
155,520 (STM-1)
128,653
Multiple Service Capability
ATM Multiplexing of MPEG-2 TS and G703 data streams
up to 7 TS for single UNI throughput
up to 2x3 TS for dual UNI throughput
Signalling Capability (option)
Full ATM UNI broadband switched services
(Supports SVC, PVC)
Complies with UNI 3.1
ATM Adaptation Layer
ATM Adaptation Layer type 1 (AAL1)
Compliant with ITU-T recommendation I.363
Compliant with ITU-T recommendation J.82
Bit errors and cell losses correction mechanism RS (128,124) x 47
Adaptive source clock frequency recovery mechanism
ATM Adaptation Layer type 5 (AAL5)
Compliant with ITU-T recommendation I.363
Compliant with ITU-T recommendation J.82
CRC based error detection mechanism
Adaptive source clock frequency recovery mechanism
Management
Services Connections management:
complies with UNI 3.1 ATM Forum protocol
controlled either from front panel keypad (in shortform mode) or from a
remote manager (in explicit mode)
100 port descriptors address book downloadable in NVRAM
SNA 4600 control and monitoring:
operated either from front panel keypad or from a remote manager
Alarm interfaces:
One dry contact alarming on rear panel (configurable)
(9-pin SubD connector)