Toshiba DVR8-X - Manual (Page 115)

97
9. Repeat the steps above to add two more filters:
IAANTmon:4 and IAANTmon:3
NOTE: The properties for each filter will remain the same except
the Event ID field, which corresponds to the filter name.
10. After all three filters are added save the settings. File >
Save
11. Exit the Event Sentry Management Software. File > Exit
12. Double Click the Surveillix DVR icon on the desktop to
restart the DVR software.
13. The Event Sentry will run in the background and monitor
the RAID array.