Customizing your receiver – Technics SA-DX1050 User Manual
Page 14

Customizing your receiver
14
RQT5802
For front speakers with an impedance under 6
Ω
Turn “LOW IMP“ on if even one of your speakers has an impedance
under 6
Ω
.
Press and hold [A] or [B] until “LOW IMP”
lights up on the display.
Press and hold down again to cancel “LOW IMP”.
Note that when “LOW IMP” is on, SPEAKERS A and B cannot be
used at the same time.
SPEAKERS A, B
SPEAKERS
A
B
LOW IMP
SPEAKERS
A
This manual is related to the following products: