Topcom Talking Pedometer 100 - Manual

V 1.1 - U8006623/1
TOPCOM Talking Pedometer 100 - User Guide
1 Introduction
Thank you for purchasing our Talking Pedometer 100. While you are keeping
your eyes on the road, this unique product tells you how many steps you have
taken, how far you have walked or jogged, and how many calories you have
burnt. Simply press a button and a clear voice tells you everything. The alarm
clock can also help you to define your own workout time.
2 Safety notes
• Please read through the instruction manual before using the pedometer.
• Keep this user guide for further reference
• Do not expose to direct sunlight, high temperature, moisture or dirt
3 Getting Started
There are 6 different modes : ‘Standard mode’, ‘Timermode’ and 4 ‘Set-up’-
modes.
3.1 Standard mode:
• The display shows by default the ‘Stepcounter’ and the ‘Current time’.
• Press [UP] to switch between ‘Current Time’, ‘Distance Walked’ and
‘Calories Burned’
• Press [TALK] . A Digital English Voice will report the information on the
display.
• To reset the step counter & calories burned, press [CLEAR] .
3.2 Timer mode:
• Press [MODE] once to display the count up timer.
• Press [UP] to start and press [UP] again to pause the timer.
• Press [CLEAR] to reset the timer when stopped.
3.3 Time Set Mode:
• Press [MODE] twice.
• Press [UP] to increase the hour or press [Down] to increase the
minutes.
• Press hold [UP] or [DOWN] in order to increase the digits rapidly.
• Press [CLEAR] to switch between 12 hr. or 24 hr. mode.
• The unit returns to Standard mode automatically 1 minute after last key
pressed.
3.4 Alarm Set Mode:
• Press [MODE] button 3 times.
• Press [UP] to increase the hour or press [DOWN] to increase the
minutes.
• Press hold [UP] or [DOWN] in order to increase the digits rapidly.
• Press [CLEAR] to toggle on/off the alarm or to change the alarm sound.
When the alarm is on, the icon [ ] will be displayed on the screen.
• The unit returns to Standard mode automatically 1 minute after last key
pressed.
3.5 Step Size Mode:
• Press [MODE] button 4 times.
• Press [UP] to increase or press [Down] to decrease the step length
by 5cm.
• Press hold the [UP] or [DOWN] button in order to increase or
decrease the step length rapidly.
• The valid range of step length is between 5 and 200cm.
• The unit returns to Standard mode automatically 1 minute after last key
pressed.
Note: An individual's stride may vary in length. Input the appropriate length
by for example measuring the distance of 10 steps and average them by
dividing by 10 to get your own step length.