TANDBERG TT1282 - Manual (Page 14)

TT128x High Definition Professional Receiver/Decoder
14
Table 3.3: Selecting a Menu Option
Step Action Result
1 Select the menu and display the
required selection.
Normally there is only one
selectable item. If there is more
than one, use the Right and
Left pushbuttons as described in
Table 3.4.
2 Press Edit on the front panel. The Save button comes on to
show that the new option can be
stored.
3 Use the arrow pushbuttons to step
through the options.
This action scrolls through the
options in a continuous loop.
4 Press Save to store the option or
press Edit to cancel the selection
and return to the source menu.
3.5.2 Entering a Menu Value
Some items shown in the right display area of the front panel LCD
display have a user-entered value. An example of this is the IP Address
(Menu 7.1.3) in which the unit’s Network address has to be entered.
Use the following steps as a general guide to entering a value.
Table 3.4: Entering a Menu Value
Step Action Result
1 Select the menu and display the
required selection.
2 Press Edit on the front panel. The Save button comes on to
show that the new value can be
stored.
3 Use the Right or Left pushbutton to
move the cursor to the required
digit.
Each pushbutton has a built-in
LED that turns on if the
pushbutton function is
appropriate to the displayed
information.
4 Change the value by using the arrow
pushbuttons.
5 Press Save to store the option.