Tanaka 746451 - Manual (Page 2)

Owner’s Manual
PROFESSIONAL CUTTING HEADS
ISM, Inc. • 1028 4th St. SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212 • www.tanakapowerequipment.com
Ref Part Number Part Description Qty
1 356-33830-200 Adapter, 8mm x 1.25mm LH Male 1
2 356-3383B-200 Adapter, 10mm x 1.25mm LH Female 1
3 786-33830-200 Body, Nylon Cord 1
4 315-33830-200 Nut, Special 1
5 793-33830-200 Spring, Reel 1
6 787-33830-200 Reel, Nylon Cord 1
7 789-33830-200 Cap, Body 1
8 788-33830-200 Eyelet 2
The Original
BRAIN ®
The BRAIN ®
2000
FULLY AUTOMATIC
Aluminum Fixed
Line
Aluminum Manual
Feed
Manual Feed
HEAVY-DUTY COMMERCIAL
Cutting Head Assembly
Place the spool into the inner housing. Pass both line
ends through the eyelets and remove the lines from the
locking slots of spool as shown in Ref. 10. Place the
return spring into the spool, then place the outer housing on
the inner housing and assemble firmly by pushing the two
locking slots with thumbs as shown in Ref. 11. Adjust nylon
line to desired length by pushing in on the tap button and
turning the spool.
Troubleshooting
Problem: Nylon line is not feeding.
Possible Causes:
1.) Nylon line is almost used up.
2.) The lines have been deformed .
3.) The lines have become intertwined.
Solutions:
1.) Disassemble the cutting head.
2.) Remove nylon line from the spool and rewind.
3.) Replace the nylon line if the line is almost gone or deformed.
4.) Reassemble the cutting head.
Ref. 11 Ref. 10
TANAKA OFFERS OTHER HIGH QUALITY CUTTING HEADS
Parts List
5” SEMI-AUTOMATIC CUTTING HEAD
ITEM NUMBER: 746451
(#27976 - Page 2)
Order # 746251
Std. Line Diameter: .095”
Line Capacity: 30ft. / 9.1m
Order # 746280
Std. Line Diameter: .130”
Line Capacity: N/A
Order # 746290
Std. Line Diameter: .105”
Line Capacity: 15ft / 4.5m
Order # 746551
Std. Line Diameter: .095”
Line Capacity: 25ft / 7.6 m
Order # 746751
Std. Line Diameter: .095”
Line Capacity: 20 ft./ 6.7m