Toshiba Blu-Ray Disc Player BDX2000KU - Manual (Page 49)

49 EN
FUNCTION SETUP
• BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is “Allow”.)
1 Follow steps 1 to 4 in “Connection Test” on
page 46.
2 Use [K / L] to select “Enable(Custom)”, then
press [ENTER].
3 Use [K / L] to select “BD-Live Setting”, then
press [ENTER].
4 Use [K / L] to select the desired setting, then
press [ENTER].
“Allow”:
Internet access is permitted from all BD-Live contents.
“Limited Allow”:
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
“Prohibit”:
Internet access is prohibited from all BD-Live contents.
5 Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Deactivate all the network connection and settings.
1 Follow steps 1 to 4 in “Connection Test” on
page 46.
2 Use [K / L] to select “Disable”, then press
[ENTER].
3 Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
You can confirm the current software version.
1 Follow steps 1 to 3 in “Connection Test” on
page 46.
2 Use [K / L] to select “Software Update”, then
press [ENTER].
3 Use [K / L] to select “Current Version”, then
press [ENTER].
4 Press [ENTER] or [RETURN] to exit.
You can upgrade the software by using disc.
1 Follow steps 1 to 3 in “Connection Test” on
page 46.
2 Use [K / L] to select “Software Update”, then
press [ENTER].
3 Use [K / L] to select “Disc Update”, then press
[ENTER].
4 Use [K / L] to select “Yes”, then press [ENTER].
5 Disc tray will open automatically.
• Insert the disc for software update and then press
[OPEN/CLOSE A].
6 After completing loading disc, confirmation
message will appear. Select “Yes” and press
[ENTER] to start upgrading.
• It may take awhile to complete the updating. (Please
wait until “100%” appears on the front panel display.)
7 After the disc upgrade finishes, this unit will
restart and eject the disc.
Disable
Note
• The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.
Software Update
Current Version
Note
• Please visit http://www.tacp.com to download the
latest firmware version.
Disc Update
Note
• You can check the current firmware version in
“Current Version” in “Software Update” menu.
• Please do not unplug the AC power cord while
executing the “Disc Update”.
• All settings will remain the same even if you update
the firmware version.
If you wish to check latest update
or other product information,
please check our Website.
Others
Current Version
x.xxx Current Version
www.tacp.com
I
NT
R
O
D
U
CT
IO
N
C
ON
NE
CTIONS
P
LAYBACK
FUNCTI
O
N
S
E
TUP
O
TH
E
R
S
E5PJ1UD_EN.book Page 49 Thursday, September 10, 2009 6:45 PM