Telenetics DSP 9612 - Manual (Page 9)

Installation
Page 10
™ A power supply that provides either:
− 85 to 265 Volts AC, 50 to 60 Hz, single phase or 85 to
400 VDC (if you have the model DSP9612FP modem), or
− 10 to 53 Volts DC (if you have the model DSP9612-LV
modem)
Hardware Overview
Back View
Figures 2-1 and 2-2 show the back view of the two DSP9612 modem
models. Starting from the left side, these views show:
™ A 4-wire/2-wire configuration block. See page 26.
™ A female, 25-pin RS-232 connector, for connecting a standard
DTE (RTU). See page 28.
™ A POWER ON/OFF switch.
™ A power connector. See page 27.
Figure 2-1. Back View of Model DSP9612FP Modem