Telit Wireless Solutions GM862-GPS - Manual (Page 48)

GM862-GPS Hardware User Guide
1vv0300728 Rev. 0 - 27/04/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 48 of 55
9 Camera
9.1 Camera Transchip
The GM862-GPS provides a direct support for Transchip digital cameras with the following
characteristics:
9.1.1 Camera interface connectors
The 50-pins Molex connector of the module and a 24 pins ZIF connector for the CMOS camera
provide the interface connection between GM862 and Transchip camera.
Molex 52991-0508 GM862 TC5747MF24L
Pin Signal I/O Notes Pin Signal I/O
46 GPIO3
PD(6)
O I2C bus serial clock 1 SCLK I
2-4-6 GND Ground 2 AGND I
50 GPIO7
CAM_PWR_ON
O External 2.8V Regulator enable
controlled by CAM_PWR_ON pin
3 AVDD28 * I
34 GPIO9
PD(1)
O Camera Reset 4 RESET_N I
25 MON1
MON1_CAM
O Clock 5 CLK_IN ** I
2-4-6 GND Ground 6 DGND I
n.c 7 DOUT_0 I/O
n.c 8 DOUT_1 I/O
n.c 9 DOUT_2 I/O
n.c 10 DOUT_3 I/O
n.c 11 DOUT_4 I/O
n.c 12 DOUT_5 I/O
Type: TRANSCHIP TC5747
Technology: CMOS COLOR camera
Max picture size: VGA 480x640 pixels landscape
Output format: JPEG
Sensitivity: 4 Lux