TrekStor USB-Stick SE - Manual (Page 3)

EN: QUIcK GUIDE
for Microsoft® Windows ME / 2000 / XP / Vista,
Mac® OS X as of version 10.3, and Linux® as of
kernel 2.4.x
a) Start your operating system.
b) Plug in the
USB-Stick SE into the USB port of
your computer.
c) Your system will recognize a USB mass storage
device. Under "M
y
c
oMputer
", you will find a new
symbol ("d
evice With
r
eMovable
s
torage
") that you can
use to access the new USB-Stick SE .
• Do not use USB cables longer than 3 meters.
• Exposing the unit to an electrostatic discharge, among other things,
may interrupt the data transfer between the unit and the computer.
If this occurs, the unit should be unplugged from the USB port and
then plugged in again.
The manufacturer retains the right to continuously improve the
product. These changes may be made without being directly
described in these quick guides. For this reason, the information
provided in these quick guides may not reflect the current state
of the art.
The manufacturer only guarantees suitability for the product"s
intended purpose. In addition, the manufacturer is not responsible
for damages or loss of data and subsequent consequences.
Copyright © 2007 TrekStor GmbH & Co. KG. All rights retained.
Other cited product or company names may be trademarks or
brand names of the respective owner.