Texas Instruments 2004 - Manual (Page 10)

Feature Highlights
1-2
1.1 Feature Highlights
The TI TPA2010D1 audio amplifier evaluation module and the TI Plug-N-Play
audio amplifier evaluation platform include the following features:
- TPA2010D1 Low-Voltage Audio Power Amplifier Evaluation Module
J 1.45 mm x 1.45 mm NanoFree

WCSP
J Fully-differential filter-free Class-D amplifier
J Single channel, bridge-tied load (BTL)
J 2.5-V to 5.5-V operation
J 2.5-W output power into 4 Ω at 5 V, BTL
J Internal depop and quick start-up circuitry
J Internal thermal and short-circuit protection
J Module gain is set at 2 V/V
J Completely Pb-free
- Quick and Easy Configuration With the TI Plug-N-Play Audio Amplifier
Evaluation Platform
J Evaluation module is designed to simply plug into the platform,
automatically making all signal, control, and power connections.
J Platform provides flexible power options.
J Jumpers on the platform select power and module control options.
J Switches on the platform route signals.
J Platform provides quick and easy audio input and output connections.
- Platform Power Options
J Onboard 9-V battery
J External 5-V to 15-V (V
CC
) supply inputs
J External regulated V
DD
supply input
J Socket for onboard 5-V/3.3-V V
DD
voltage regulator EVM
J Onboard overvoltage and reverse polarity power protection
- Platform Audio Input and Output Connections
J Left and right RCA phono jack inputs
J Miniature stereo phone jack input
J Left and right RCA phono jack outputs
J Left and right compression speaker terminal outputs
J Miniature stereo headphone jack output