Technicolor - Thomson TU-SZT105A - Manual (Page 14)

Screen Format
Letterbox Letterbox
Center Cut Center Cut
16:9 Wide 16:9 Wide
This setting affects the video format at the TV output. (4:3
relates to normal screen format, 16:9 relates to widescreen
format)
If your display is 4:3 format and the transmission of a
program happens to be 16:9, the Normal/Letterbox mode
will give you a complete picture, but black areas will appear
at the top and bottom.
Alternatively you can choose the Normal / Centre Cut
mode to play the program in a full-screen format, however
information on the left and right sides may be cut off.
If your display is 16:9 format, then set the mode at Wide. If
a program happens to be in 4:3, black areas will appear at
the left and right of the screen in order to present the
picture in a correct viewing aspect ratio.
SCART Mode
From here you may adjust SCART mode to
Component output or Composite output or RGB output.
You must choose the correct mode to match the video input
Connection of the TV that you did in the Quick Connect Guide.
MPEG Audio Level
From here you may adjust MPEG audio level from –12 db
to 0 db. This adjustment only applies when MPEG audio is
being received. The system detects MPEG audio
automatically.
Audio Mode Priority
z The Audio mode allows you to adjust the audio setting. You may choose Dolby Digital
(Dolby D) or MPEG1. Use W/X to select your choice. This setting determines your
initial choice of soundtrack based on the audio mode, and you may select any
soundtrack channel by channel, regardless of the audio mode setting made in this
menu.
14