Tekkeon ET2000 - Manual (Page 9)

7 USER GUIDE
Receiving Calls
When you receive a call on your mobile phone, you will hear the mobile phone ring before you hear
the ring tone through your headset as there is a small delay before the headset recognizes the
incoming call. If you do not wish to answer the call, you can use the Call Reject feature to reject the
call and send the caller to voice mail (if available).
To Receive a Call
1. When you hear ring tone on your headset, press the headset TALK button. The call is
automatically connected to your headset.
To Reject an Incoming Call
(if supported by your mobile phone)
1. When you hear ring tone on your headset, press and hold the TALK button for four seconds until
you hear two soft beeps to reject the call.
NOTE: For some mobile phones, you must configure the phone to answer calls directly on your
Bluetooth headset. Refer to the mobile phone user guide for instructions for initiating this feature.
Ending Calls
1. When you have finished your call, press the headset TALK button. The call will be disconnected.
Transferring Calls
You can transfer calls from your mobile phone to your headset.
To Transfer Calls from Your Mobile Phone To The Headset
1. With the call connected to your mobile phone, press the TALK button on your headset.