Telex IP-223 iDen Interface NI-223 Plus - Manual (Page 7)

- 8 - NI223Plus
3.4 C-Soft Setup
Note
This example shows a basic setup for C-Soft. Please refer to the User manual for other
Vega IP based consoles if necessary.
3.4.1 Setup IP Multicast List
Figure 4 Setup IP Multicast List – iDen® Radio in Phone Mode operation
Figure 4 shows an example of setting two lines in Phone mode. In this example, the Line Type is
selected as Phone mode. The Line Name is arbitrary and called Line 31 and Line 32 in this case.
The Rx port numbers need to be unique; typically they are just the next number in a standard
assignment sequence. The Base Radio IP address will be the IP address of the IP-223 that is
connected to the NI223
plus.
3.4.2 Set Global Parameters
Figure 5 Setup Global Parameters - Phone Ring Multicast and Port
Figure 5 shows the Phone Ring Multicast and Port number setting. This value will be the same as
that shown in Figure 1.