Teledyne 6600 User Manual

Page 140

1-50 Part III

Part III

Model 6600

Teledyne Analytical Instruments

Please refer to the Control Unit Section Part I of the

manual.

power
1

utility power (requires remote circuit
breaker operation) for pumps if
elected.. In the event the systems are
turned off for maintenance, etc.(in
particular, a bypass pump,
homogenizer).

Sample Utility manually 3-way
solenoid water valve, (selects
between sample or utility water-
usually operated manually).

Instrument power into control unit
(requires external circuit breaker
operation) for all autozero valves in
sample system, controlled by the
Instrument control unit.

Note: The cell purge solenoids may be

used in a particular application,
instead of zero prepared water.

Signal and Alarm connections
1

Please refer to the Reference
drawings below for connections and
test points for the signals and alarms.

See Analog Outputs as

indicated under Section electrical
connections.
b)