beautypg.com

3 what you need to make recordings, 4 connecting the porta02, 2 – parts of the porta02 – Tascam PORTA02 User Manual

Page 8: 2 parts of the porta02

background image

2 Parts of the Porta02

8

1.3

What you need to make recordings

Apart from the Porta02 itself, you will
need:

Some kind of stereo mastering
recorder to produce the stereo record-
ings. This can be a cassette recorder
such as the TASCAM 102Mk II or an
MD recorder such as the TASCAM
MD301. A recorder which does not
have recording level controls is not
suitable for use as a master recorder.

You will also need RCA (pin or
phono) cables to connect the Porta02
to other equipment.

Some monitoring equipment (some
kind of amplifier and speaker system).

Headphones, if you intend doing any
work with microphones. These will
avoid acoustic feedback (“howl-
round”) when recording. Additionally,
headphones are sometimes useful
when panning tracks on mixdown, as
you can hear the precise position of
each track.

Of course, you will also need some
kind of sound source to record (instru-
ment or microphone, etc.).

1.4

Connecting the Porta02

1) Make sure all the equipment is

turned off.

2) Connect the

LINE OUT

terminals of

the Porta02 to the amplifier, using
a pair of terminals on the amplifier
such as

AUX

or

VIDEO

.

3) Connect your mastering recorder

to a set of four

TAPE

terminals on

the amplifier (two for

REC

and two

for

PLAY

).

You may be using an integrated system in
which the mastering recorder and ampli-
fier are built into one enclosure. In this
case, you do not need to follow step 3.

You can listen to the Porta02 by selecting
the amplifier’s input source to be from the
terminals to which you connected the
Porta02 (

AUX

or

VIDEO

, etc.).

When you have mixed down and you
want to listen to the mixed tape, you
should select the mastering recorder as
the amplifier’s input source.

2 – Parts of the Porta02

This section gives an explanation of the
different parts of the Porta02, and what

they do.

NOTE

Do not use any terminals marked

PHONO

or

intended for record decks. These are connected
to a special circuit inside the amplifier which
makes them unsuitable for anything except
record decks.

Left

speaker

Right

speaker

Amplifier

Mastering recorder

PLAY OUT

to

TAPE IN

TAPE OUT

to

REC IN

Porta02

To AUX IN

LINE

OUT