beautypg.com

Connecting to an audio mixer (not included), Installation, Preparatory adjustments – Technics SL-1210M5G User Manual

Page 6: Horizontal balance and stylus pressure, Release the tone arm, Adjust horizontal balance, Turn the stylus pressure control to “0, Adjust stylus pressure

background image

RQT7021

6

Connections and installation

Connecting to an Audio Mixer (not
included)

Disconnect all units from the power source before making any con-

nections.

Reconnect the AC power supply cord after all other connections

are complete.

Installation

Install the unit on a horizontal surface protected from vibrations.
Keep this unit as far as possible from speakers.

Ensure the unit is not exposed to direct sunlight, dust, humidity,

and heat from a heating appliance.

This unit may pick up interference from a radio if there is one nearby.

Keep radios as far as possible from this unit.

Adjusting the height of the insulators

Place the unit where it is to be used and adjust the height of the legs
to make the unit horizontal.

Preparatory adjustments

Horizontal balance and stylus pressure

1

Release the tone arm.

1. Remove the stylus cover, taking care not to dam-

age the stylus, then release the arm clamp.

2. Free the tone arm from the arm rest.

Arm clamp

2

Adjust horizontal balance

1. Push the cue lever down.
2. Turn the anti-skating control to “0”.
3. Turn the balance weight until the arm is approxi-

mately horizontal.

Take care at this time not to allow the stylus to touch the unit.

;

;

;;

Arm clamp

Arm rest

Cue lever

Anti-skating control

Balanced

Too far forward

Too far back

3

Turn the stylus pressure control to “0”

1. Return the tone arm to the arm rest and fix it

with the arm clamp.

2. Turn the stylus pressure control to “0”.

Hold the balance weight still while doing this.

Balance weight

Center line

Turn stylus
pressure
control

Arm clamp

For your reference

Use the stylus weight (included)
to increase stylus pressure by 4
grams.

Head shell

Stylus weight

4

Adjust stylus pressure

Turn the balance weight to adjust to the appropri-
ate pressure for the cartridge you are using.

See the cartridge’s instructions for recommended stylus pressure.
The stylus pressure control will turn at the same time. Stop
when the center line points to the required pressure.

Turn
balance
weight

Center line

;

;

Unit

Earth lead

Audio mixer

Unit

This manual is related to the following products: