beautypg.com

Technicolor - Thomson ShowView VPH6920F User Manual

Page 32

background image

17

The video recorder has an Auto LongPlay function. If you have programmed a recording

which exeeds the recording time remaining on the tape, the video recorder automatically

transfers to Long Play mode (LP).

Auto LongPlay

ShowView

ShowView and the satellite demodulator

If ShowView programming does not operate correctly, it may be because the video recorder

clock is not set correctly.

If the time is correctly set, check and correct if necessary the ShowView numbers assigned to

the various channels.
Press buttons MENU, 2 ,3 one after the other

to display the menu on the right:
Some television programme guides give the numbers

corresponding to the channels. Follow the screen instructions

to check and change the ShowView numbers.
Some cable or satellite channels share a transmission channel. To

programme ShowView successfully for these channels, each channel has to be set up with a

different Pr number and must also have a different ShowView number.
Refer to the «Manual Channel Setup» chapter of the Getting Started guide to modify the

channel numbers if necessary.

If you programme the recording, using ShowView codes, of a programme broadcast by

satellite, the ShowView programmer can ask you to confirm the channel number (Pr99).

Connection by the aerial cable - During the automatic channel set-up, the video recorder has

assigned channel number 99 to the satellite receiver connected by the aerial socket. Select

this number to view the pictures of the satellite channels. Should these pictures not come up

on the screen, refer to the Set-up manual, chapter “Manual channel set-up”.

Connection by the AUDIO/VIDEO 1 or 2 socket - If your satellite receiver is connected to the

video recorder by the audio video socket, do not choose a number but select the AV1 or AV2

socket.

CHAINE

SHOWVIEW

Pr 3

155

> Pr 4

123 <

Pr 12

101

DEFILER
ANNULER

SORTIE

E

-

+

/

ShowView is a registered trademark of Gemstar Development Corporation.
The ShowView system is manufactured under licence from Gemstar Development Corporation.

0000

A D D I T I O N A L

i n f o r m a t i o n s

U-T7075PSR/GB/SC-BEI/812 4/01/99 11:11 Page 17