Topcom BABY VIEWER 2500 - Manual (Page 3)

3
Topcom Baby Viewer 2500
EN
GLISH
1 Introduction
Thanks for purchasing the Baby Viewer 2500. Now you can see and hear your baby during
sleeping or you can monitor your older children in their playroom.
2 Safety Instructions
WARNING:
Adult assembly required. Keep small parts away from children when
assembling.
This product is not a toy. Do not allow children to play with it.
• Always read the user guide instructions carefully before using the device
• Keep this User's Manual for future reference.
• Do not place the camera in the crib or within the arm’s reach of the baby.
• Never use extension cords with the enclosed AC adapters.
• Secure the cords away from babies reach.
• Test the monitor before use. Get confident with the functionallity.
• Do not use the monitor near water.
• Do not install the monitor on heat sources.
• Only use the charger plug supplied. Do not use other chargers, as this may damage the
battery cells.
• Only insert rechargeable batteries of the same type. Never use ordinary,
non-rechargeable batteries. Insert rechargeable batteries so they connect to the right
poles (indicated in the battery compartment of the handset).
• Do not touch the charger and plug contacts with sharp or metal objects.
3 Description
See folded cover page
3.1 Parent Unit
1. Display
2. VOX indicator LED (Voice Operated
Transmission)
3. Melody indicator LED
4. Volume indicator LED’s
5. Speaker
6. Link indicator LED
7. Power indicator LED
8. VOX button
9. Melody select button
10. Melody start/stop button
11. Antenna
12. Belt clip
13. Battery cover
14. DC power adapter Jack
15. On/Off/Volume switch
16. LCD brightness Low button
17. LCD brightness High button