Tricity Bendix BS680-1 User Manual

Page 9

NOTE: It is good practice to:

Fit an Earth Leakage Circuit Breaker to your
house wiring.

Wire your appliance to the latest IEE regulations.

PREPARING CABINET FOR FITTING OF OVEN

Make sure the cabinet is the correct size for the
appliance to be fitted (Ref. Fig.3 and 4.)

If the size is between 565-570mm, then the
cabinet should be modified so that at the screw
fixing points the recommended dimension of at
least 560-565mm is maintained. The modification
should ideally be localised to ensure that after
screw fitment the oven is securely fixed into
position.

The cabinet must be stable and level by firmly
securing it to the wall or floor. If necessary, make
arrangements to ensure the shelf upon which the
oven will rest is level.

HOW TO FINISH UNPACKING

Place packed cooker next to the cabinet in which
it will be installed.

Remove the cooker packing except for bottom
tray which should be left in position until the
cooker is ready to be fitted into its cabinet.

Ensure the owner is given these operating
instructions.

TOOLS REQUIRED

The following tools will be needed and its helps to
assemble them before starting to install your oven:-

A terminal screwdriver (3mm wide blade)
A pozidrive screwdriver
Pliers
Wire strippers
Knife
Sidecutters
Adhesive Tape
Tape Measure

Fig. 2