Top Innovations CF-980 - Manual (Page 6)

6
Top Innovations, Inc.
CF-980 C
ENTURION TM P
RODUCT
I
NFORMATION
· The Inlet Nozzle Hole (1) is where the Inlet Nozzle of the Flexible Hose connects to
the main unit.
· The Suction Power Control (2) lets you adjust how powerful the vacuum suction is.
· The On/Off Switch (3) activates and deactivates the unit.
· The Grounded Power Cord (4) provides exceptional mobility while protecting
against electric shock and injury.
· The Side Vent Panel (5) is where exhaust is emitted from the unit. The left Side
Vent Panel (not shown) is removable and houses the ULTRA filter.
· The Removable Suction Tube (6) is inserted into the removable water tank and
funnels vacuumed materials into the water in the Water Reservoir.
· The Sponge Filter (7) is inserted into the removable water tank and provides extra
filtration. It uses a built-in safety float to control the amount of water and materials
that is drawn through the filter.
· The ULTRA Filter (8) fits inside the left Side Vent Panel, and helps to prevent
dust and other impurities from being released back into the air.
· The Suction Tube Inlet (9) is where the Suction Tube is inserted into the removable
water tank. Water is also poured into the Water Reservoir through this hole.
· The Sponge Filter Inlet (10) is where the Sponge Filter is inserted into the removable
water tank.
· The Maximum Fill Line (11) indicates the maximum amount of water that can safely
be poured into the Water Reservoir, and should never be exceeded.
· The Water Reservoir (12) is where water is poured to assist in the filtration process.
· The Lifting Handle (not shown) located in the middle-bottom of the main water tank
allows you to more easily lift the main water tank into and out of the cradle car.
· The Locking Handle (13) flips up to securely attach the removable water tank and
the main unit to the cradle car.
· The Power Cord Holders (14) are the pegs that the Grounded Power Cord is looped
around for safe and convenient storage.
· The Large Wheels (15) and Front Caster (16) work in conjunction to provide
exceptional freedom and maneuverability.
· The Telescopic Extension Tube (17) is attached to the Main Siphon and greatly
increases your reach, allowing you to more easily vacuum floors and hard to reach
surfaces.
· The Flexible Hose (18) connects the Main Siphon to the main unit, and allows you
the flexibility for any vacuuming needs. It connects to the main unit via the Inlet
Nozzle (19), and is equipped with an Accessory Holder (20), which can be slid to
any point along the Flexible Hose and conveniently stores the Crevice Tool and
Upholstery Tool. The Main Siphon (21) serves as the handle while vacuuming, and
the nozzle to which the Telescopic Extension Tube is attached.
· The Floor Brush (22) attaches to the end of the Telescopic Extension Tube and can
be used to clean both carpeted and hardwood floors.
· The Crevice Tool (23) may be attached to the Telescopic Extension Tube in place of
the Floor Brush, and is designed for cleaning in narrow, hard-to-reach places.
· The Upholstery Tool (24) may be attached to the Telescopic Extension Tube in
place of the Floor Brush, and is designed to safely and effectively clean furniture,
curtains, and other upholstered surfaces.