TRENDnet TV-IP301W - Manual (Page 43)

42
the Preset Position with a number.
Preset Position When you have saved position(s) in the camera,
select the position number from the pull-down
list; the camera’s lens will move to the position
immediately. You can use the Delete button to
remove the preset position(s). You can save up
to 8 positions.
- Custom protocol setting: Selecting this field allows you to
configure the commands protocol manually. You can click
Test to test each command that you have assigned. In the
Name and Command String boxes, you can
customize more
buttons for your needs. Please note that the setting values in
the Command String boxes should be from the connected
external device (please refer to the manual of connected
device).