Tricity Bendix AW1002 W - Manual (Page 14)

14
Operating sequence
5. Select Prewash, Intensive, Super Quick
option
Press the «Options»
button repeatedly, to
select only one of the
available options. The
relevant light will light
up.
Prewash: select this option if you wish your
laundry to be prewashed at 30°C before the
main wash
(not available for Wool, Handwash,
Mini 30’ and Silk) . The prewash ends with a short
spin in programmes for cotton and synthetic
fabrics, and Sport 40°, whereas in the
programmes for delicate fabrics and Sport 40°
Shoes the water is only drained.
Intensive: this option can be selected for heavily
soiled laundry: the washing intensity will be
increased and the washing time will be
prolonged by few minutes depending on the
selected type of fabric.
This option can be selected with all cottons,
Synthetics and Delicates programmes, except
for Eco and Easy Iron programmes.
Super Quick: a very short cycle for slightly
soiled items that have been used or worn for a
short time.
This option is
not available with the Wool,
Handwash, Mini 30’, Silk, Sport Shoes 40°, Easy
Iron, Sport 40° and Eco programmes.
The max. load recommended for cotton: is 3 kg
and for synthetic and delicate is 1.5 kg.
IMPORTANT!
If an option is chosen that is not allowed with the
selected programme, the red pilot light of the
Start/Pause button will flash 3 times.
The washing time will be reduced according to
the type of fabric and the selected temperature.
6. Select the Extra Rinse option
This button can be
selected with all
programmes except the
Mini 30’, Silk, Wool and
Hand wash
programmes. The
machine performs some
additional rinses.
This option is recommended for people who are
allergic to detergents, and in areas where the
water is very soft.
7. Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding green pilot
light stops flashing.
The «Wash» and
«Door» lights are alight
to indicate that the
appliance starts
operating and the door
is locked.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding green pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the Start/Pause
button again.
If you have chosen a delayed start, the machine
will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the Start/ Pause button flashes for 3
times.
126.2942.00…AW1002W.qxd 29/11/07 19:00 Página 14