Troy-Bilt 24B-060F766 User Manual
Operator’s manual
Table of contents
Document Outline
- NOTE: Not all safety labels may apply to your Yard Vacuum.
- NOTE: Reference to right or left hand side of the Yard Vacuum is observed from the operating position.
- NOTE: The safety switch button attached to the mounting bracket must be fully depressed by the front tab on the bag handle when securing the bag or the engine will not start. See Figure 4.
- NOTE: The blower chute is an optional feature on some model yard vacuums. It is NOT standard equipment. If your unit is not equipped with a blower chute, contact Customer Support as instructed on page 2 for information regarding price and availability.
- NOTE: In general, raise the nozzle height to vacuum a thick layer of leaves or to operate with the blower chute (if equipped) and lower the nozzle height for smoother surfaces.
- NOTE: When tipping the unit, empty the fuel tank and keep spark plug side up.
- NOTE: Make certain chipper blade is reassembled with the sharp edge facing upward. See Figure 16.
- NOTE: For repairs beyond the minor adjustments listed above, contact your nearest authorized service dealer.