Texas Instruments MC-1000WU-20A - Manual (Page 16)

2-2 Specifications
2.1 Specifications
Table 2–1 lists the specifications for the MC-1000WU-20A camera.
Table 2–1. Specifications
Item Specification
Imager Texas Instruments TC215 Full-Frame CCD
Resolution 1024(H) 1024(V) (total imager)
1000(H) 1017(V) (active pixels)
Pixel size 12 m m 12 m m
Imager size H: 12.2 mm
V: 12.0 mm
Synchronization Internal/external (jumper selectable)
TV mode
Shutter mode
1050 lines/frame (33 blank lines)
15 frames/sec
non-interlace
1050 lines/frame (33 blank lines)
10 frames/sec (max)
Sensitivity 0.29 lux (max)
0.35 lux (typ)
0.41 lux (min)
1/30 integration
Video output: 100 IRE
S/N ratio: 48 dB
Light source: T=2870
°
K
S/N ratio 48 dB
MTF 10 MHz chart, 35% (typ), 500 nm
White clip 0.90
±
0.05 V
Setup level 50
±
10 mV
Output dc level 0.30
±
0.05 V
Sync level 0.30
±
0.015 V
Supply voltage +5
±
0.15 Vdc
–12
±
0.4 Vdc
+12
±
0.4 Vdc
Power consumption (typical) +5 V at 0.820 A
+12 V at 0.180 A
–12 V at 0.150 A
Non-uniformities Total black and white pixel non-uniformities, less than 20. Vertical line non-
uniformities, less than 5.
Shading (maximum)
Horizontal
Vertical
10% 100%
15 mV 50 mV
20 mV 70 mV
Vertical frequency 15.46 Hz
Horizontal frequency 16.234 kHz
Gamma 1.0