The Singing Machine STVG-502 - Manual (Page 10)

CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
another video source:
(4) Set the FUNCTION SELECT switch to AUX and the MONITOR ON/OFF switch to ON.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
AUDIO CONNECTION
Connect the STVG-502 to your TV or home stereo system using the White and Red connections
on the supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on
the STVG-502. Plug the red end of the patch cord into the red AUX OUT jack on STVG-502. Now
connect the other end of the cable’s white (left channel) and red (right channel) plugs to your TV
or home stereo system’s ‘AUDIO IN’ or ‘AUX IN’ jacks.
(1) Locate the multicolored patch cords.
(2) Connect video cable (yellow) to the Video In of the back of the Singing Machine.
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video
source such as a VCR.
MAKING THE CONNECTIONS
VIDEO
INPUT
AUDIO
INPUT
R L
AUX OUTPUT
L
(White Jack)
REAR VIEW OF
SINGING MACHINE
R
L
OUT IN
AUX
REAR VIEW OF TV
AUDIO INPUT
L
(White Jack)
AUX OUTPUT
R
(Red Jack)
VIDEO
OUT
AUDIO
OUT
R L
VIDEO INPUT
(Yellow Jack)
VIDEO OUTPUT
(Yellow Jack)
REAR VIEW OF
SINGING MACHINE
R
L
OUT IN
AUX VIDEO
IN
OUT
REAR VIEW OF VCR
E9
ENGLISH
AUDIO INPUT
R
(Red Jack)