Toastmaster 2244CAN - Manual (Page 5)

4.
Hand Held Can Opener Use and Care Guide
Using The Can Opener
See Operating Instructions Before First Use for assembly instructions.
1. Remove all packaging materials before using.
2. Place the Can Opener on a level surface and plug into 120V~60 Hz
electrical outlet.
3. Fold the Magnet down in the operating position as shown in
Figure 2.
4. Place can level.
5. Raising Piercing Lever, place can under Guide Bar and against
Geared Wheel, see Figure 4.
6. Press down on Lever to pierce lid of can. Release the Lever and
can will stop automatically when opened.
7. Grasp the can, then raise the Lever up from the can.
8. Slide the lid away from the Magnet. Use caution to avoid injury
from sharp edge of lid.
CAUTION: Always unplug Can Opener from electrical outlet when
not in use and before cleaning. Never immerse Can Opener, cord or
plug in water or any other liquid.
CAUTION: Do not use scouring pads or any type of harsh cleansers
that may damage the surfaces or dull the Cutting Blade.
FIGURE 3 FIGURE 4
TMR_2244,B&CAN_IB_25-11-04 11/25/04 3:40 PM Page 4