Tricity Bendix TB 584 R - Manual (Page 9)

9
Freezer
The freezer compartment will become progressively
covered with frost. This should be removed with the
special plastic scraper provided, whenever the
thickness of the frost reaches 1 /
4
”.
During this operation it is not necessary to switch of
the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
and it is advisable to perform this operation when the
appliance is empty.
For complete defrosting (once or twice a year)
proceed as follows:
1 Turn the thermostat dial to the "OFF" position (O) or
disconnect the appliance from the mains.
2 Remove any food from inside the freezer and
fridge; wrap it in several sheets of newspaper and
store in a cool, dry place.
3 When defrosting is complete, dry the interior
thorough.
4 Reconnect the appliance to the mains or reset the
thermostat to 5 (coldest) and leave to run for at
least four hours.
5 Replace the previously removed food.
6 Return the thermostat to the normal position.
Important
A temperature rise of the frozen food packs during
defrosting may shorten their safe storage life.
Never use sharp metal tools to scrape off frost from
the evaporator as this could damage the appliance
beyond repair.
Changing the Light Bulb
Should the light fail to work you can change it as
below:
Disconnect the appliance from the electricity supply.
Remove the lamp cover retaining screws, then take
the lamp cover off in the direction of arrow and the
bulb can be changed. (Type of the bulb: 230 V, 15 W,
E 14 thread)
After changing bulb replace the lamp cover and
retaining screws and reconnect the appliance to the
electricity supply.