Tripp Lite BCPERS450 User Manual
Page 2
Output Volt Amp Capacity
(VA)
450
Output Watt Capacity
(watts)
280
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility
60 Hz
Output voltage regulation
(Battery mode)
115V (+/- 5%)
Built-in UPS output
receptacles
3 5-15R outlet(s)
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
3.1A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type
5-15P
UPS Input cord length (ft.)
6
UPS Input cord length (m)
1.8
Recommended Electrical
Service
15A 120V
BATTERY
Full load runtime (minutes)
4.6 min. (280w)
Half load runtime (minutes)
14.8 min. (140w)
DC system voltage (VDC)
12
Battery recharge rate
(included batteries)
Less than 3.6 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
UPC ASSIGNMENT
Unit Carton UPC#
037332033116
LEDS ALARMS & SWITCHES
LED Indicators
3 LEDs indicate line power, battery power and battery low/replace status
Alarms
Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status