Controls and connections – Tripp Lite B006-004-R User Manual
Page 2

System Requirements:
Any PC or Macintosh computer with:
•
An available USB port
•
A USB-compliant operating system (Windows 98, Windows 2000, MacOS 8.1 or later)
•
A standard HDB-15 video adapter
Features:
•
Use one standard monitor, USB keyboard and USB mouse to control up to four USB enabled PCs or
iMacs
•
Share four USB devices among attached computers.
•
USB 1.1 compliance ensures full compatibility with your USB devices.
•
Operating System-independent operation.
•
Hot Pluggable - Connected PC’s can be added or removed without powering off the KVM switch.
•
Plug-n-Play monitor support.
•
Switch supports video resolutions up to 1920 x 1440.
•
No software required.
•
Built in Auto Scan mode.
•
Buffering technology prevents system failure.
•
LEDs for easy status monitoring.
Specifications:
Port Selection
Hot Keys or Manual
LED’s
Identify Port Selection
Console Connectors
Monitor
HDDB15 Female
USB
USB Type A Female
PC Connectors
Monitor
HDDB15 Male
USB
USB Type B Female
Video Resolution
Max: 1920 x 1440 DDC2B
AutoScan Intervals
3 or 15 Seconds
Power Consumption
DC 5V, 15mA
Controls and Connections:
Front Panel:
1. “Selected” LEDs - Illuminated LED indicates the port currently selected.
2. “Auto Scan” LED - Flashes when Auto Scan Mode is in effect.
3. Port Selection Switch – Push to manually select the corresponding port.
4. On-Line LEDs – Illuminates when the associated computer is properly connected, powered on and
operational.
5. Auto Scan Switch - Toggles Auto Scan Mode ON/OFF
Overview... Overview...
Rear Panel
1. Console Video Connector - Connect your monitor here.
2. Scan Time Selection Switch - Select the amount of time the switch monitors each port (3 or 15 seconds)
when Auto Scan Mode is enabled.
3. Downstream USB Ports - Connect your USB keyboard, USB mouse and two other USB devices here.
4. Upstream USB Ports – Connection port to connect your iMac or PC to the switch.
5. PC Video Ports - These video ports connect to your iMac, G3/G4 or PC to provide the necessary video
connection.