TP-Link TL-R860 - Manual (Page 45)

TL-R860 Cable/DSL Router User Guide
Figure 5-38 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries:
1. Click
the Add New.. button.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click
the Save button to save it.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify or Delete as desired on the Modify column.
To find an existing entry:
1. Click
the Find button (shown in Figure 5-37).
2. Enter the MAC Address or IP Address.
3. Click
the Find button in the next page (shown in Figure 5-39).
Figure 5-39 Find IP & MAC Binding Entry
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.
5.9.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address in the ARP list, and you can also configure
the items in the ARP list. This page displays the ARP List, it shows all the existing IP &
- 40 -