Technics SX-PR54/M - Manual (Page 115)

Part VIII Sound Edit
115
QQTG0701
So
un
d E
d
it
FILTER ENVELOPE
Specify how the filter changes over time, from
the time the key is played to the time the sound
dies out.
1. Use the PAGE buttons view the 3/4 display.
• The display looks similar to the following.
• Use the
▲ and ▼ buttons to select a setting item and
then the
∧
and
∨
buttons to specify a selection.
2. Use the buttons to the left of the display to
select a tone.
3. Use the
∧ and ∨
buttons to modify the respec-
tive filter envelopes.
• Use the buttons below the display to adjust the respective
settings.
• You can select CUTOFF ADJUST and use the
∧
and
∨
buttons to set the total upper and lower settings, the
START POINT to set the start point, and the STOP
POINT to set the stop point.
4. Repeat steps 2 and 3 for the other tones, as
desired.
FILTER ENVELOPE TOUCH & KEY
FOLLOW
Specify how the filter envelope (curve) changes
relative to touch or note pitch.
1. Use the PAGE buttons to view the 4/4 display.
• The display looks similar to the following.
• Use the
▲ and ▼ buttons to select a setting item and
then the
∧
and
∨
buttons to specify a selection.
2. Use the buttons to the left of the display to
select a tone.
3. Modify how the respective filter envelopes
change relative to touch.
• Select TOUCH TIME and use the
∧
and
∨
buttons to
specify the time change, and select TOUCH LEVEL and
use the
∧
and
∨
buttons to specify the level, relative to
touch.
• At a − setting, the softer the keys are played, the greater
the change. At a + setting, the harder the keys are
played, the greater the change.
4. Select KEY FOLLOW and use the
∧ and ∨
buttons to modify how the respective filter
envelopes change relative to note pitch.
• Adjust the respective slopes for attack, decay and
release. Select CENTER and use the
∧
and
∨
buttons to
specify the center of the bend slope by note name.
13_Part VIII.fm 115 ページ ２００３年５月２０日 火曜日 午前８時２１分