Toshiba SG-1700 - Manual (Page 16)

15
MEMORY DIALING
You can store up to 10 telephone numbers in memory.
Notes
In memory dialing operation,
• If more than 20 seconds elapse between pressing buttons, the operation will be cancelled and
you must start over again.
• If you press a wrong button, an error tone sounds and the handset returns to standby mode.
• If a call comes in, the operation will be canceled and you will hear the ring.
1. STORING NUMBERS
You can store up to 20 digits including #, , TONE, and PAUSE in one
memory address.
q Pick up the handset from the base unit. (Do not press TALK .)
w Press MEM .
e Dial the telephone number you wish to store. (up to 20 digits).
r Press MEM .
t Enter the memory address (0 to 9) at which you wish to store the
phone number stored in step 3.
You will hear a long beep when the number is successfully stored.
To store more telephone numbers, repeat the steps from w to t .
y Return the handset to the base unit.
u Record the telephone numbers on the SPEED DIAL INDEX CARD,
and place it on the back of the handset.
EXAMPLE: To store 9012345 in memory address 3
MEM 9 WX 0 1 2 3 4 5 MEM 3
Replacing a telephone number
Just store the new number following the same steps in “1. STORING
NUMBERS.”
The new number will replace the previously stored one.