Taylor 3700-44 - Manual

Mechanical Kitchen Scale
Balance Mécanique de Cuisine
Báscula de Cocina Mecánica
3700-44
® Leading the Way in Accuracy
Instruction Manual - Manuel d'instructions
Manual de instrucciones
One Year Limited Warranty
Taylor® warrants this product to be free from defects in material or workmanship
for one (1) year from date of original purchase. It does not cover damages or
wear resulting from accident, misuse, abuse, commercial use, or unauthorized
adjustment and/or repair. If service is required, do not return to retailer. Should
this product require service (or replacement at our option), please pack the item
carefully and return it prepaid, along with store receipt showing the date of
purchase and a note explaining reason for return to:
There are no expressed warranties except as listed above. This warranty gives you
specific legal rights, and you may have other rights which vary from state to state.
Il n'y a aucune garantie expresse sauf celle indiquée précédemment. Cette
garantie vous donne des droits précis, mais vous pouvez aussi avoir d'autres
droits qui varient d'une juridiction à l'autre.
No existen garantías expresas excepto las enunciadas anteriormente. Esta garantía
le otorga derechos legales específicos y es posible que usted tenga otros derechos
que varíen de un estado a otro.
© 2005 Taylor Precision Products, Inc. and its affiliated companies, all rights reserved. Taylor®
and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products, Inc.
and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Fabriqué en Chine selon nos spécifications exactes.
Fabricado en China según nuestras especificaciones exactas.
Taylor® Precision Products
2220 Entrada del Sol
Las Cruces, New Mexico 88001
Garantie limitée d'un an
Taylor® garantit que ce produit est libre de tout défaut de matériaux ou de main
d'œuvre pour une période d'un (1) an à partir de la date d'achat original. Elle ne
couvre pas les dommages ou l'usure suite à un accident, une mauvaise utilisation,
tout abus, utilisation commerciale ou réglage interdit et/ou réparation interdite.
Si l'appareil doit être réparé, ne le retournez pas au détaillant. Si ce produit doit
être réparé (ou remplacement à notre discrétion), veuillez l'emballer avec soin et
le retourner à frais prépayés avec la facture du magasin indiquant la date d'achat
et une note expliquant la raison du retour à l'adresse suivante:
Garantía limitada por un año
Taylor® garantiza este producto contra defectos en los materiales y en la mano de
obra durante 1 (un) año a partir de la fecha de compra original. No cubre daños ni
desgastes que sean consecuencia de accidentes, uso inadecuado, abuso, uso
comercial, ni ajustes y/o reparaciones no autorizadas. Si necesita mantenimiento,
no la devuelva al vendedor minorista. Si este producto requiere mantenimiento (o
cambio a nuestro entender), sírvase empacar el artículo cuidadosamente y envíelo
con el franqueo pagado, junto con el recibo de la tienda en el que aparezca la
fecha de compra y una nota explicando el motivo de la devolución a:
3700-44 11.05
Thank you for purchasing a Taylor® scale. Your Taylor®
scale is an example of superior design and craftsmanship.
Please read this instruction manual carefully before use.
Keep these instructions handy for future reference.
1. Place the scale base on a hard, level surface.
Place the weighing bowl so that it is stable on
top of the base unit.
2. The pointer should indicate “0” before objects to
be weighed are placed on the scale. To adjust
the scale to “0”, rotate the scale ring, which has
the measurement increments printed on it.
3. You may also use the scale ring to tare, or offset,
the weight of one ingredient before adding
another ingredient to the same bowl. For
example, if a recipe calls for ½ lb rice and ½ lb
beans, place the rice into the bowl, then rotate
the scale ring back to “0”. Add the beans until
the pointer shows ½. Both ingredients have been
accurately weighed in the same bowl.
4. Carry the scale by holding the base unit. If the
scale is relocated, readjustment to “0” may be
required. To do so, repeat steps 1 and 2.
General Weighing Operation
1. The scale base is not dishwasher safe. Immersing
the scale in water may trap liquid between the
lens and the body that cannot be effectively
dried-out. Damage will void warranty.
2. An occasional wiping with a soft cloth and mild
soap will keep your Taylor® scale clean and
attractive. Do not use abrasive cleaners. Your
Taylor® scale does not require oiling or
lubrication of any kind.
3. The bowls are top-shelf dishwasher safe.
4. Do not put either the base unit or the bowls in a
microwave.
5. Protect the scale from flames, heat, direct
sunlight and high humidity.
6. Do not tamper with the scale's internal
components. Doing so will invalidate the
warranty on this unit and may cause damage.
The scale contains no user-serviceable parts.
Care and Maintenance