Technika MC-229I User Manual
Page 11
9
iPod ADAPTORS
SELECTING AN ADAPTOR
Before docking your iPod you must first check if your iPod
has a docking connector. Early iPod models do not have one
and cannot be docked to your unit. The docking connector is
located on the base of the iPod as shown below.
LIST OF SUPPLIED ADAPTORS
c
iPod mini (4GB or 6GB)
d
iPod, 4th gen. with a B&W display and clickwheel with
legends on wheel (20GB or 30GB)
e
iPod, 4th gen. with a B&W display and clickwheel with
legends on wheel (40GB)
g
iPod photo, with a colour display (40GB or 60GB)
h
iPod nano 1st gen. with flat sides.
i
iPod video 5th gen. (30GB or 60GB) and iPod Classic
(80GB or 120GB).
1)
iPod video 5th gen. (80GB) and iPod Classic (160GB).
1!
iPod nano 2nd. gen with round sides.
Other iPod models with dock connectors
Your iPod may have been supplied, packed with a standard
dock adaptor. If so, this can be used as the docking bay on
your unit is compatible with adaptors supplied by Apple.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor,
you can buy one from Apple on-line. To determine the exact
model of your iPod, refer to this web-link - http://support.
apple.com/kb/HT1353. You can then browse the iPod
accessories page on the Apple website to find an adaptor for
your iPod model that can be purchased on-line.
Once you have located the correct adaptor for your iPod, press
it gently into the iPod Docking Bay before attempting to dock
your iPod.
FINDING THE CORRECT iPod ADAPTOR
Your iPod docking system is supplied with a selection of
docking adaptors that are compatible with several models in
the iPod range. Refer to the table of iPod models in the next
column which lists the adaptor numbers (marked on the side
of the adaptor), compatibility and instructions for obtaining
an adaptor for unlisted models.
NOTE: Do not dock an iPod without fitting the correct adaptor,
you may damage the iPod and your unit.
Docking Connector
iPod adaptor
Docking bay
Before docking your iPod, you must first remove the cover
from the docking bay and fit the correct iPod adaptor. Each
iPod adaptor matches the shape of a particular iPod and is
necessary to ensure that your iPod is securely held when
docked.